camera setup
DAY/NIGHT
You can specify a recording mode according to the scene.
1. Select <CAMERA SET> - <DAY/NIGHT>.
2.Select a screen transition mode according to the illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the scene.
NIGHT : Fixed to NIGHT mode, regardless of the scene.
If BURST is set to <ON>, the burst signal will output.
AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice versa.
DAY NIGHT / NIGHT DAY : If set to
<AUTO>, you can specify the brightness level triggering the mode switch between DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed.
Any excessively bright area in a night scene will be masked.
AUTO |
|
BURST | OFF |
DAY NIGHT |
|
BRIGHTNESS | MID |
DWELL TIME | 2S |
NIGHT DAY |
|
BRIGHTNESS | MID |
DWELL TIME | 5S |
MASK AREA | 1 2 |
MASK AREA |
|
<SIZE> |
|
<LOCATION> |
|
WHITE BAL
If you need to adjust the screen brightness, use the WHITE BALANCE function.
1.Select <CAMERA SET> - <WHITE BAL>.
2.Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value in DAY mode.
NIGHT : You can adjust the <WHITE BAL> according to the ambient luminance.
|
| WHITE BAL |
|
| |
|
|
|
| ||
|
|
|
|
| |
DAY/NIGHT |
|
| DAY | ||
MODE | [ | 00] | ATW2 | ||
RED |
| I | |||
BLUE | [ | 00] | I |