30X PTZ Network Camera SNP-3300
5.2. Camera Setting
5.2.1. White Balance
The White Balance function corrects the abnormal white color into the normal white color under any color temperature lighting.
Select the mode among ATW, AWC and Manual. ATW is selected by default.
WB Mode
ATW
Balances the color automatically depending on the source of light from 1,800~10,500K color temperature
-Indoor[ATW(I)] : Use this mode in the area under the limited color temperature.
-Outdoor[ATW(O)] : Use this mode in the area under the broad color temperature.
AWC:
Set up the lighting to the objects and corrects the right color temperature to that of a white object. Camera works under the setup conditions. For the most appropriate condition under the current illumination, capture the white paper and then change the mode into AWC. Press the Enter key and then AWC Start will be displayed. When the adjustment is completed after pressing the Enter key for AWC Start, go to the upper menu. When conditions change, adjust the white balance function again
70
