Samsung SNP-3300 user manual Initialization Setting, Initialization Menu

30X PTZ Network Camera SNP-3300

5.6. Initialization Setting

Initialization Menu

①Power On Reset

Camera is initialized into the original status of power input.

②Factory Default Settings

Camera is initialized into the factory default settings. Data including Preset is deleted. This function is used for initialization all settings.

③Camera Default Settings

If only the camera module is replaced due to camera module failure, the new camera module can be set up with the settings of the old camera module.

➍Auto Refresh

The electric circuit and the status of the equipment parts within the camera are optimized regularly. (The cycle can be set up.) If camera faces toward a certain source of light or if the settings cannot be kept because of the long time rotation filming of a certain area, the Auto Refresh function is used to maintain and re-set the existing camera settings. Default setting is OFF.

ƒOFF, 1-7 Days : This function is disabled in the OFF mode. 1-7 Days enables the Auto Refresh operation in the interval of the selected days. Auto Refresh takes less than 10 seconds. The message “Auto Refresh” disappears after finishing the operation.

92