Changing the 3D Mode
Picture > 3D > 3D Mode
111Launch 3D and then select 3D Mode under Picture > 3D.
222Choose from the 3D modes that appear on the screen. Supported 3D Mode may vary depending on the 3D content.
"" 3D Mode is automatically configured for most 3D content.
The following 3D Mode is available. However, mode availability may vary depending on the 3D content's format.
"" The supported resolutions vary for each mode. Refer to the "Supported Resolutions for each 3D Mode" section for more information.
●● 
(Off)
Deactivates 3D viewing.
●● 
(Normal)
Converts normal images to 3D images.
"" Some formats do not support this mode.
●● 
(L/R)
Splits a single image into left and right overlapping images to create the 3D effect.
●● 
(T/B)
Splits a single image into top and bottom overlapping images to create the 3D effect.