Using Anynet+ (HDMI-CEC)
Use Anynet+ (HDMI-CEC) to control all external devices that support HDMI-CEC using just the TV's remote control. Note that Anynet+ (HDMI-CEC) only works with the TV's remote control and not with the panel keys.
You can configure the TV's universal remote function to control third-party cable boxes, Blu-ray players, and home theatres that do not support HDMI-CEC using the TV's remote control. Refer to the "Controlling External Devices with the TV Remote (Universal Remote Setup)" section for more information.
Anynet+ Requirements:
●● Anynet+ cannot be used to control external devices that do not support HDMI-CEC.
●● Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not support Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
●● The TV remote control may not function under certain circumstances. If this occurs select the Anynet+ device again.
●● Anynet+ (HDMI-CEC) only works with external devices that support HDMI-CEC and only when those devices are either in standby mode or turned on.
●● Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type). With home theatre systems, however, the number of systems that can be controlled is limited to one.
●● To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI cable and the device's digital audio output connector directly to the home theatre system.
●● A home theatre system that has been connected to the TV using an HDMI cable and an optical cable supports 2-channel audio only. 5.1-channel audio is, however, available for digital broadcasts with 5.1-channel audio.
Setting Up Anynet+ (HDMI-CEC)
System > Anynet+ (HDMI-CEC) Try Now
●● Anynet+ (HDMI-CEC) Try Now
Enables/disables Anynet+ (HDMI-CEC). Set to Off to disable all Anynet+ related features. Set to On to enable all Anynet+ (HDMI-CEC)related features.
●● Auto Turn Off Try Now
When set to Yes. turns off Anynet+ (HDMI-CEC)compatible external devices when the TV is turned off.
"" Some Anynet+ (HDMI-CEC)compatible devices do not support this feature.
●● Search for Devices Try Now
