The Schedule Recording/Timeshift function isn't

working.

The Problem

Try this!

 

 

The TV cannot

Refer to the USB device's manual and see if data can be stored on it.

recognise the USB

Check if the USB device is in a locked state.

device or the Format

Device, Check

Check if the USB device was formatted when it was connected to a computer. Formatting a USB device after connecting it to the TV may result in a formatting

Device and Device

Performance Test

failure. If Device Performance Test or Format Device has failed, there may be a

functions fail.

problem with the USB device or its specifications. Try using a different USB device.

There is a message

saying I need to

Check if the USB device is in a locked state.

Use the USB recovery function to recover the USB device.

format the USB Drive.

Check if there is a USB device connected to the TV.

Schedule Recording Check if the channel is a digital channel that can be recorded. Recording will

cannot be used. automatically stop if the signal becomes too weak. The Timeshift function will not work if there isn't enough storage space on the USB device.

I get a performance test failure message

and then Schedule

This problem can occur when using a low-performance USB Drive that does

Recording and the

not support recording. A USB hard drive with a speed of 5,400rpm or above is recommended. A USB memory stick is not supported.

Timeshift operation stops working.