Connecting to a TV Viewing Card slot
"" Availability depends on the specific model and area.
To connect the CI CARD, follow these steps:
A CI Card Adapter that lets the TV use two different CI Cards is available, depending on the model.
Using the “CI or CI+ CARD”
To watch paid channels, the “CI or CI+ CARD” must be inserted.
"" Turn the TV off to connect or disconnect a CI card.
●● If you don’t insert the “CI or CI+ CARD”, some channels will display the message “Scrambled Signal”.
●● The pairing information containing a telephone number, the “CI or CI+ CARD” ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message appears please contact your service provider.
●● When the configuration of channel information has finished, the message “Updating Completed” appears indicating the channel list is updated.
Requirements:
●● You must obtain a “CI or CI+ CARD” from a local cable service provider.
●● When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.
●● Insert the “CI or CI+ CARD” in the direction marked on the card.
●● The location of the COMMON INTERFACE slot may be different depending on the model.
●● “CI or CI+ CARD” is not supported in some countries and regions; check with your authorised dealer.
●● If you have any problems, please contact a service provider.
●● Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.