Anynet+ (HDMI-CEC) isn't working.

The Problem

Try this!

 

 

 

Confirm that the device is an Anynet+ device. The Anynet+ system supports

 

Anynet+ devices only.

 

Check if the power cord of the Anynet+ device is properly connected.

 

Check the cable connections of the Anynet+ device.

Anynet+ does not

Go to System and see if Anynet+ (HDMI-CEC)has been set to On.

Check whether the TV remote control is in TV mode.

work.

Check whether the remote control is Anynet+ compatible.

 

 

Anynet+ may not function when certain functions are operational. (Channel Search,

 

Smart Hub, set up, etc.)

 

If you have disconnected and then reconnected the HDMI cable, scan for devices

 

again or turn your TV off and on.

 

 

 

Check if the Anynet+ device is properly connected to the TV and then navigate to

I want to start

the System menu to see if Anynet+ (HDMI-CEC)is set to On.

Anynet+.

Once verified, select TOOLS button. A list appears. Select Anynet+ (HDMI-CEC)

 

from the list and then a device.

 

 

I want to exit Anynet+.

Select View TV from the Anynet+ menu.

Select a non-Anynet+ device from the Source list.

 

 

 

The message

 

"Connecting to

You cannot use the remote control when you are configuring Anynet+ or switching

Anynet+ device..."

to a viewing mode. Use the remote control after the TV has completed the Anynet+

or "Disconnecting

configuration or has switched to a viewing mode.

from Anynet+ device"

 

appears on the screen.