Inserting Batteries into Samsung Smart Control

"" Availability depends on the specific model.

To use Samsung Smart Control, first refer to the figure below and insert batteries into the unit.

111Gently pull on the battery cover's notch and then remove the cover completely once it comes loose.

222Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.

333Place the battery cover on the remote control and insert the top part of the cover into the remote control.

444Press the catches on both sides of the battery cover in the order shown so that the cover is completely attached to the remote control.

When you see this alarm icon on the screen

Following alarm icon indicates Samsung Smart Control's batteries are low. If the alarm icon pops up, replace the batteries. Samsung recommends using alkaline batteries for a longer operating life.

<Low Battery Alarm Icon>

Page 33 Page 35
Page 34
Image 34
Samsung UA48H6800AWXSQ manual Inserting Batteries into Samsung Smart Control, When you see this alarm icon on the screen
Page 33 Page 35
Top Page Image Contents