!If the first number is 
, it is correct otherwise press 
until
appear.
@ When pressing the | button | ~ appear on the display, |
select one of them. |
|
|
# When pressing the | button | ~ appear on the display, |
select one of them. |
|
|
$ When pressing the | button | ~ appear on the display, |
select one of them. |
|
|
% When pressing the | button | ~ appear on the display, |
select one of them. |
|
|
^When pressing the 
button 
~
appear on the display, select one of them.
Step 3 : Reconfirming option set after completion
(in case of ex. 000000-1700b7)
After pressing 
selector for the 
mode, the display shown as 
.
After pressing 
selector for the 
mode, the display shown as 
.
Step 4 : Pressing the ON/OFF button ( 
)
When pressing the operation ON/OFF key with the
direction of remote controller for unit, the sound “Ding” or “Diriring” is heard and the first LED lamp on the left side is flickering at the same time, then the input of option is complet- ed. (If the diriring sound isn’t heard, try again pressing the ON/OFF button.)
Step 5 : Unit operation test-run
First, Remove the battery from the remote controller.
Second,
Third, Press ON/OFF key with the direction of remote controller for set.
• Error Mode
1st | If all lamps of indoor unit are flickering, Plug out and plug in again and pressing ON/OFF key to retry. |
2nd | If the unit is not working properly or all lamps are continuously flickering after setting the option code, see |
| if the correct option code is set up for it’s model. |
21
