SERVICE

Connector for service only.

SERVICE

✎✎NOTE

•For HDMI/DVI cable connection you must use the HDMI IN 1(DVI) port.

•If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.

•When connecting a PC to the HDMI cable, you must use the HDMI IN 1(DVI) port.

•PC(D-Sub) and PC/DVI AUDIO IN input are not supported.

•COMPONENT/AV IN input is not supported.

•DIGITAL AUDIO OUT(OPTICAL) is not supported.

•Connecting through the HDMI cable may not be supported depending on the PC.

Connecting to a COMMON INTERFACE slot

(Your TV viewing Card Slot)

To watch paid channels, the “CI or CI+ CARD” must be inserted.

TV Side Panel

• If you do not insert the “CI or CI+ CARD”, some channels will display the

message “Scrambled Signal”.

 

• The pairing information containing a telephone number, the “CI or CI+

 

CARD” ID the Host ID and other information will be displayed in about

 

2~3 minutes. If an error message is displayed, please contact your service

 

provider.

 

• When the configuration of channel information has finished, the message

 

“Updating Completed” is displayed, indicating the channel list is updated.

 

✎✎NOTE

 

• You must obtain a “CI or CI+ CARD” from a local cable service

yy The image may differ depending on the model.

provider.

 

•When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may cause damage to it.

•Insert the “CI or CI+ CARD” in the direction marked on the card.

•The location of the COMMON INTERFACE slot may be different depending on the model.

•“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

•If you have any problems, please contact a service provider.

•Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.

Changing the Input Source

Source

TV / Ext. / HDMI1/DVI / HDMI2

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV. ✎✎Press the SOURCE button. In the displaying Source list, connected inputs will be highlighted.

✎✎PC(D-Sub) input is not supported. If you want to connect PC to the TV, use HDMI1/DVI input. ✎✎Ext. always stays activated.

✎✎Press the TOOLS button.

•Edit Name

You can set an external input sources name you want.

––When connecting a PC to the HDMI IN 1(DVI) port with HDMI cable, you should set the TV to PC mode under Edit Name.

––When connecting a PC to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI PC mode under Edit Name.

––When connecting an AV devices to the HDMI IN 1(DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under Edit Name.

•Information

You can see detailed information about the connected external device.

English

English - 7