Samsung UN46ES6580 Configuring a Wired Network Connection, Network Settings, Menu Network, Start

Configuring a Wired Network Connection

Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your 1V needs to access the Internet so you don'thave to enter them manually. If you have a Static IP network, see your user'smanual for configuration instructions.

To

configure the network connection for a wired network that uses

DHCP,

follow these steps:

1.

Connect

your

1V

to

your network

as

shown

in

one

of

the

illust

ra

tions

on page 16.

2.

Turn on your 1V, Settings)

and then

go to the

Network Settings

screen .

(Menu->

Network->

Network

3.

Select

Start.

4.

The Network Connection screen appears, and verifies the network connection. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider. " message appears. Network set up is completed.

~

If your TV cannot acquire network the connection values automatically or if you want to set the connection manually, select IP Settings on the network connection screen . Set IP Setting to Enter manually, and then enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.

~

For more detailed information,

refer to

"Setting

up

the Wired Network" in thee-Manual.