Regulatory Compliance Statements

-Federal Communications Commission

(FCC)-

USA

-Industry

Canada Equipment Standard for Digital Equipment (ICES-003)- Canada

-Voluntary Control Council for Interference (VCCI) -Japan

-Bureau

of

Standards Metrology and Inspection (BSMI) -Taiwan

-Korea Communications Commission(KCC) -Republic

of

Korea

-Italian

Post Ministry (Homologation)- Italy

FCC

Class A Notice

This device
complies
with
part
15
of
the FCC Rules. Operation
is
subject
to
the
following
two
conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of
the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is
operated
in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used
in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation
of
this equipment
in
a residential area is likely to cause harmful interference
in
which case the user will be required to
correct the interference at his own expense.

FCC

Class B Notice

This device
complies
with
part
15
of
the FCC Rules. Operation
is
subject
to
the
following
two
conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of
the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in
a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in
accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur
in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of
the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
--Connect
the equipment into
an
outlet on a circuit different from that to which the receiver
is
connected.
-- Consult the dealer or
an
experienced radio/TV technician for help.

User Information

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment. If necessary, consult with your dealer or an experienced radio/television technician for additiona
suggestions.
You
may find the booklet called How to Identify and Resolve Radio/TV Interference Problems helpful.
This booklet was prepared by the Federal Communications Commission. It
is
available from the U.S. Government Printing Office.
Washington, DC 20402, Stock Number 004-000-00345-4.

The

party

responsible for

product

compliance:

SAMSUNG ELECTRONICS CO., LTD.
America QA Lab
of
Samsung
3351 Michelson Drive
Suite #290, Irvine, CA92612 USA

Warning

User must use shielded signal interface cables to maintain FCC compliance for the product.
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed personal computer with similar configuration.
Before making the connection, make sure the voltage rating
of
the computer convenience outlet is the same as the monitor and
that the ampere rating
of
the computer convenience outlet is equal or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed detachable power cord with NEMA configuration 5-15P type(parallel blades) plug
cap. For 240 Volt applications use only UL Listed detachable power supply cord with NEMA configuration 6-15P type
(tandem blades) plug cap.
This television receiver provides display
of
television closed captioning
in
accordance with Section 15.119
of
the FCC rules.
(TV broadcast receivers with picture screens 13 inches or larger
in
diameter models only)