" | Connecting to a Network |
You can set up your TV so that it can access SMART TV applications through your local area network | |
(LAN) using a wired or wireless connection. | |
~ After you have "physically" connected your TV to your network, you must configure the network | |
connection to complete the process. You can configure the con nection during the Initial Setup | |
process (see page 23) or after the Initial Setu p process, th rough the TV'smenu (see page 31). | |
Network Connection - Wireless |
|
You
can
connect your TV to
your local
area
network
(LAN)
through a standard wireless
ro
uter
or modem .
The
LAN
Port
on
the Wall
Wireless IP Rout Modem that has a Server
er or OHCP
((<
LA
N
Cab
le
(Not
Supp
li
ed)
This TV supports the IEEE 802.11 a/b/g and n communication protocols. Samsung recommends using IEEE 802 .11 n. If you play video using IEEE 802 .11a, b, or g, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless router or modem) to transmit an encrypted security code called an access key.
Your TV
is
compati
ble with
the
fo
llowin
g
security protocols:
•
Authentication
Mode:
OPE
N,
SHARED, WPAPSK, WPA2PSK
•
Encryp
tion
Type:
WEP,
TKIP,
AES
If you select Pure | 11 n mode and the Encryption type is set to WEP or |
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance w ith new | |
| |
