Connecting DVD-VCR to the TV using the Component Video Cable (DVD Only)
Your TV must support progressive scan input to allow you to watch component video output.
You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(Pb), red(Pr) signals to present most clear and clean images.
onnectionsC |
|
|
| |
1 | Connect Component video cables between the | |||
| ||||
| COMPONENT VIDEO OUT jacks on the rear of | |||
|
|
| the | |
|
|
| on the rear of the TV. | |
|
|
|
| |
| 2 | Connect audio cables between the AUDIO LINE | ||
| OUT jacks on the rear of the | |||
AUDIO IN jacks on the rear of the TV.
•Take care to respect the colour coding of the left and right channels.
COMPONENT VIDEO OUT
1
2
COMPONENT INPUT
COMPONENT VIDEO IN
❚Progressive Scan
If the TV connected supports Progressive Scan, press the PROGRESSIVE button on the front panel in stop mode.
•The Progressive Scan feature is only available for DVD. Activate it in DVD Stop mode.
•The message “Press OK to confirm Progressive scan mode. Otherwise press RETURN.” will be displayed. If you want Progressive scan mode, select OK. Make sure that the disc has stopped completely before changing the mode.
•To cancel the progressive scan mode, press the PROGRESSIVE button in stop mode.
•Make sure that the colour coded connections match. That is, the Y, Pb and Pr component output jacks of your DVD
If your TV does not have Progressive scan mode, there will be no signal on the screen.
Note If you press the PROGRESSIVE button, it will be changed to Interlace scan mode. See your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s instructions regarding Progressive Scan settings in the TV’s menu system.
Depending on your TV, the method of connection may differ from the illustration above.
What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.
You must connect the player to the component(s) before using the Progressive Scan feature.
Use the Component Video connection method only for the DVD.
NTSC DVD disk is not supported.
