Troubleshooting

Symptom

 

Checklist

 

 

 

Motor does not start.

Check the cable, the power plug and outlet.

 

 

 

• Check if there is any blockage, and remove it if required.

Suction force is gradually

Please check the filters, and if required, clean as illustrated

decreasing.

 

in this manual.

 

––If filters are out of condition, replace them with new

 

 

 

 

ones.

Cord does not rewind

Pull the power cord out 2 - 3 m and press the Cord rewind

fully.

 

button.

Body overheating

• Check the filters, and clean as illustrated in this manual if

 

required.

 

 

Static electricity

Reduce suction.

• This may also occur when air in the room is very dry.

discharge.

 

Ventilate the room so that air humidity becomes normal.

 

 

 

• This vacuum cleaner has a special thermostat that protects

 

 

the motor in case of its overheating. If the vacuum cleaner

 

 

suddenly shuts off, turn off the switch and unplug the

During using, stop the

 

vacuum cleaner. Check the vacuum cleaner for possible

unit

 

source of overheating such as a full dustbin, a blocked

 

 

hose, pipe, or clogged filter. If these conditions are found,

 

 

fix them and wait at least 30 minutes before attempting to

 

 

use the vacuum cleaner.

 

 

 

This Vacuum cleaner is approved the following. ––Electromagnetic Compatibility Directive : 2004/108/EEC ––Low Voltage Directive : 2006/95/EC

ppendicesA

18English