preparation

Maintaining the battery pack

We recommend only using the original battery pack that is available from your Samsung retailer. When the battery reaches the end of its life, please contact your local dealer. The batteries have to be dealt with as chemical waste.

Clean the terminals to remove any foreign substances before inserting the battery.

Do not put the battery pack near any heat source (i.e. fire or a heater).

Do not disassemble, apply pressure to, or heat the battery pack.

Do not allow the + and - terminals of the battery pack to be short-circuited. It may cause leakage, heat generation, induce overheating or fire.

Do not expose the battery pack to water. The battery pack is not water resistant.

When fully discharged, a battery pack damages the internal cells. The battery pack may be prone to leakage when fully discharged.

Remove from charger or powered unit when not in use. Even when the power is switched off, the battery pack will still discharge if it is left attached to the memory camcorder.

When not using the memory camcorder for an extended period:

It is recommended that you fully charge the battery pack once per 6 months, attach it to memory camcorder and use it up: then remove the battery pack and store it in a cool place again.

About the battery life

Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one.

Each battery's life is governed by storage, operating and environmental conditions.

Use only approved battery packs. Do not use batteries from other manufacturers.

Otherwise, there is a danger of overheating, fire or explosion.

Samsung is not responsible for problems occurring due to using unapproved batteries.

English_20

Page 26
Image 26
Samsung VP-MX20H, VP-MX20R, VP-MX20CH, VP-MX20L user manual Maintaining the battery pack, About the battery life