recording
Basic procedures to record movie images described below.
RECORDING MOVIE IMAGES
•Memory camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recording start/ stop button according to the use.
1.Turn the memory camcorder on.
•Connect a power source to the memory camcorder. ²pages 14, 21 (A battery pack or an AC power adaptor)
•Slide the POWER switch downward to turn on the power. ²page 22
•Set the appropriate storage media. ²page 37
(If you want to record on a memory card, insert the memory card.)
2.Check the subject on the LCD screen.
3.Press the Recording start/stop button.
•The recording indicator ( 
) will display and recording will start.
•Pressing the Recording start/stop button again during recording will set the memory camcorder to recording pause mode.
4.When recording is finished, turn the memory camcorder off.
STBY 
15 
1/10000
1.JAN.2008 12:00 | C.N | 1/25 |
|
•For
•Eject the battery pack when you have finished recording to prevent unnecessary battery power consumption.
•For approximate recording time. ²page 42
•For various functions available when you record movie images. ²pages 52~67
•If focusing is difficult, use the manual focus function. ²page 57
•During recording, some button operations are unavailable. (MENU button, etc.)
•Sound is recorded from the internal stereo microphone on the front of the memory camcorder. Take care that this microphone is not blocked.
•Before recording an important movie, make sure to test on the recording function to check if there is any problem with the audio and video recording.
•While recording, don't insert or eject the memory card as it may record noise.
•Do not operate the power switch or remove the memory card while accessing the storage media. Doing so may damage the storage media or the data on storage media.
