Samsung VP-MX20H Connecting A Power Source, Battery Pack installation / ejection, English14

preparation

CONNECTING A POWER SOURCE

•There are two types of power source that can be connected to your memory camcorder.

•Do not use provided power supply units with other equipment.

-The battery pack: used for outdoor recording.

-The AC power adaptor : used for indoor recording and playing back. ²page 21

Battery Pack installation / ejection

It is recommended you purchase one or more additional battery packs to allow continuous use of your memory camcorder.

Inserting the battery pack

1.Slide and open the battery slot cover as shown in the diagram.

2.Insert the battery pack into the battery slot until it softly clicks.

•Make sure that the SAMSUNG logo is facing up while the set is placed as shown in the diagram.

3.Slide and close the battery slot cover.

Ejecting the battery pack

1.Slide and open the battery slot cover and push the battery lock.

•Gently push the battery lock in the direction as shown in the diagram to eject the battery out.

2.Pull the ejected battery out in the direction as shown in the diagram.

3.Slide and close the battery slot cover.

Insert

CARD

Eject

CARD

CARD

English_14