Henny Penny 610ESC60XXXX, 605ESC63XXXX Space$aver, Electricity, Remove the back panel

Space$aver ™

Electricity

1.Remove the back panel.

2.Pass the LOA connection cable through the strain relief screws into the unit.

3.Tighten the strain-relief screws securely so that the LOA connection cable cannot be pulled out.

1

Figure 5: Connecting the performance optimization system (LOA)

4.Connect the LOA connection cable to the terminal strip (1), (see Chapter “Description of the terminal strip”, Page 22).

5.Remount the back panel.

Planning and installation instructions 27

Global Foodservice Solutions