Samsung VP-MX20R connecting to a PC, Transferring A Recorded File Through A Usb Connection

connecting to a PC

+
This chapter explains how to connect a PC using the USB cable for various actions.

- To connect an USB cable to a PC, refer to the software installation instructions and available PC specification.

TRANSFERRING A RECORDED FILE THROUGH A USB CONNECTION

•The camcorder supports both USB 1.1 and 2.0 standards. (Depends on the PC specification)

•You can transfer a recorded file on a storage media to your PC via a USB connection.

USB Connection Speed depending on the System

•High speed USB connection is supported by Microsoft (Windows) device drivers only.

•Windows 2000 - High speed USB on a system with Service Pack 4 or later installed.

• Windows XP - High speed USB on a system with Service Pack 1 or later installed.

•Windows VISTA - High speed USB on a system with Service Pack 1 or later installed.

Cyberlink MediaShow4

System Requirements

The following requirements must be satisfied to use CyberLink MediaShow4.

CPU	Intel® Pentium ®4, at least 3.0 GHz/AMD recommended
OS	Windows Vista or XP (Windows XP Service Pack 2)
	* Standard installation is recommended.
(Operating System)
	Operation may not assured if the above OS has been upgraded.
RAM	512MB (1 GB and above recommended)
Resolution	800 x 600, 16-bit colour or higher
USB	USB2.0 High Speed
	Intel 945GM or faster
VGA	NVIDIA Geforce 6600 or higher
	ATI Radeon X1600 or higher
	- On a low performance graphics system, running the MediaShow4 may cause error or not apply some of
	animation effects.
Miscellaneous	Internet Explorer 5.5 or later DirectX 9.0 or later
Supported media	DVD+R/RW, DVD-R/RW
	For the compatible DVD/CD burners, refer to CyberLink web site:
	http://www.gocyberlink.com/english/products/powerproducer/2_gold/comp_dvd_drives.jsp

English_84