setting up your washing machine

Connecting the water supply hose

1. Remove the adaptor from the water supply hose.

Adaptor

Water supply hose

2.First, using a ‘+’ type screwdriver, loosen the four screws on the adaptor. Next, take the adaptor and turn part (2) following the arrow until there is a 5 mm gap.

1

5 mm

2

 

3.Connect the adaptor to the water tap by tightening the

screws firmly while lifting the adaptor upwards.

Turn part (2) following the arrow and connect (1) and (2).

Water tap

1

2

4.Connect the water supply hose to the adaptor.

When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.

After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.

3

5. Connect the other end of the water supply hose to the inlet

 

water valve at the rear of the washing machine. Screw the

Option

hose clockwise all the way in.

English - 18

 

 

 

 

WD0804W8E-03264A-03_EN.indd 18

2014/12/8 13:43:54