Connecting the water supply hose (selected models)
1. Remove the adaptor from the water supply hose.
|
| Adaptor | |
|
| Water supply | |
|
| hose | |
2. First, using a ‘+’ type screwdriver, loosen the four screws |
|
| |
on the adaptor. Next, take the adaptor and turn part (2) | 1 |
| |
following the arrow until there is a 5 mm gap. | 5 mm | ||
2 | |||
|
|
01 setting up
3.Connect the adaptor to the water tap by tightening the screws firmly while lifting the adaptor upwards.
Turn part (2) following the arrow and connect (1) and (2).
1
4.Connect the water supply hose to the adaptor.
When you release part (3), the hose automatically connects to the adaptor making a ‘click’ sound.
After you have connected the water supply hose to the adaptor, ensure that it is connected correctly by pulling the water supply hose downwards.
Water tap
2
3
5.Connect the other end of the water supply hose to the inlet
water valve at the rear of the washing machine. Screw the |
| |
Option | ||
hose clockwise all the way in. | ||
|
English - 21
2015/12/25 13:23:50
