Using dry course
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than the marked line for the dried clothes of 12 kg.
1.Open the door, put in the clothes and close the door again.
2.Press the Power button and then press the Drying button. : The standard course will be selected automatically.
Drying is not available for Drum Clean, Air Wash, Active Wear, Bedding and Wool/Lingerie courses.
3.Select Drying button as follows. Drying Programs
•Every press of this button will select drying type repeatedly in the following order:
Cupboard Extra Dry Shirt Delicates Time (30 min. 1:00 h 1:30 h 2:00 h 2:30 h) Cupboard (Only for WD21F8K9** model)
Drying Type | Information | Max Load (kg) | Time (min) | Time (min) | ||
(Max Load) | (Soft Keep) | |||||
|
|
|
| |||
|
|
|
|
|
| |
Auto | Cupboard | Standard: Dries the | 12.0 | 280 | 30 | |
Drying |
| laundry. | ||||
|
|
|
|
|
| |
| Extra Dry | To dry thick clothing. | 12.0 | 330 | 30 | |
|
|
|
|
|
| |
| Shirt | To quickly dry a shirt. | - | 15 | 30 | |
|
|
|
|
|
| |
| Delicates | To dry clothes that |
|
|
| |
|
| can be deformed at | 6.0 | 190 | 30 | |
|
| high temperatures at a | ||||
|
|
|
|
| ||
|
| relatively low temperature. |
|
|
| |
|
|
|
|
|
| |
Time Drying | You can select the |
|
|
| ||
|
| appropriate drying time | - | 30/60/90/ | 30 | |
|
| depending on the texture, | 120/150 min | |||
|
|
|
| |||
|
| quantity, and moisture. |
|
|
| |
|
|
|
|
|
| |
• It automatically displays Drying Time by sensing the weight of clothes before drying for increasing the drying effect.
•For any loads of laundry, you can use the Auto Dry function. If you find that the laundry is not completely dried, use the Time Dry function additionally.
•If both the spin and drying cycles are selected, the spin speed is automatically selected to enhance the drying efficiency.
•When using the drying cycle, check if the water supply valve is opened.
•Soft Keep function is to prevent laundry from being wrinkled when the laundry is not immediately removed after drying.
•While the Soft Keep function is running, “Cycle complete” is displayed waiting for you remove the laundry.
4.Press Start/Pause button.
:It automatically performs an optimal function from washing to drying.
•The selected course can’t be altered after the start of drying.
•Selecting the Dry and Spin cycles together improves drying performance.
Calibration function
Your Samsung washing machine automatically detects the weight of the laundry.
For a more accurate weight detection, please run Calibration Mode after the installation.
1.Remove laundry or any contents in the machine and turn off the machine.
2.The drum rotates clockwise and counterclockwise approximately for 3 minutes.
3.When “Calibration Mode” is finished, the door will unlock. The washing machine is now ready for use.
Remove laundry or any contents in the machine before calibrating your washing machine.
English - 37
02 Washing a load of laundry
2015/12/25 13:23:57
