Sanyo dsr-3706pa English, 5 Click [SET], 8 Click [PREVIEW], (MOTION SENSOR SET), 3 Specify [CHANNEL], 9 Click PREVIEW screen, 7 Set [MOTION SENSOR LEVEL]

The MOTION DETECTION SEARCH screen displays.

Search Recorded Images

(User level: ID2/3)

5MOTION DETECTION SEARCH

	6	Set the detection points for motion.
2	6	(MOTION SENSOR SET)
2		The setting frame of the motion detection point will
		The setting frame of the motion detection point will
3		display in the PREVIEW screen as an 8 (vertical) x 10
3		(horizontal) square.
	5	(horizontal) square.
4	5	If you click over the square, a red mark will display and
4		If you click over the square, a red mark will display and

		be set to a motion detection point. If you click again, the
		setting will be cleared. Set a motion detection point to
	6	the required portion while viewing the PREVIEW
	6	screen.
		screen.

Message box	7

1 Click "5. MOTION DETECTION SEARCH" in the search menu.

2 SpecifyFROM". a search area using "SEARCH

Select the recording area targeted for the search.

Selections:

•ALARM (alarm recording area)

•NORMAL (normal recording area)

•ALARM AND NORMAL (Alarm/normal recording area)

3 Specify [CHANNEL].

You can specify a channel to narrow the search range. Select "--" when a channel is not specified.

4 Specify an image range to search.

The start and stop date/time of the image recorded in the DVR are displayed in [START] and [END].

Change the date and time of [START] and [END] when narrowing the search range.

5 Click [SET].

The first image of the search range is displayed as a still image in the PREVIEW screen.

If a motion detection search is not performed, click the PREVIEW screen as is. Change to main screen and playback images.

7 Set [MOTION SENSOR LEVEL].

Set the detection sensitivity of the motion sensor.

Selected value: OFF/1 (high) to 10 (low)

Increase the set value if you want to avoid detection of small vibrations or movements of the object due to factors such as wind.

8 Click [PREVIEW].

Execute a motion detection search for images within a specified search range.

When an image with movement is detected, it will display as a still image in the PREVIEW screen.

When multiple images with movement are detected, the detected images will display in order from the oldest each time [PREVIEW] is clicked.

9 Click PREVIEW screen.

Change to main screen and playback images. You can perform normal playback operations after playback starts.

Message box display

Each time search conditions are set or when the [SET] or [PREVIEW] buttons are clicked, the search status and results will display in a message box over the PREVIEW screen.

Display message:

•SEARCHING

•FOUND

•IMAGES NOT FOUND!

English