Operating a Dome Camera

(User level: ID2/3)

 

 

 

 

When connecting a coaxial superimposed dome camera, you can operate the camera by remote control using the computer. To do that, change the operation panel to the camera control panel.

•The camera control function is only available on 9/16-channel models.

•When switching from the operation panel to the camera control panel, display live video on full screen. You cannot switch to the camera control panel while using the quad-screen or the multi-screen or while playing images back.

•The camera control cannot be operated while [AUDIO] or [SAVE TO PC] are set to "ON" or if the clock of the DVR has not been set.

1 Display the live video and click the channel select button.

The full screen is displayed and the button appears.

2 Click .

The operation panel switches to the camera control panel from which you can operate the camera.

Camera control operating panel

2

1

3

4

5

67

8

9 F G H

 

 

The included example uses the

 

 

16-channel model.

3

Click

once again.

 

The camera control operating panel disappears and

the normal operation panel is displayed again.

Functions of the camera control operating panel

1Channel selection button

Click the channel that will control the camera.

The layout of the buttons varies according to the DVR model.

16-channel model: -

9-channel model: -

2Channel display box

The selected channel number is displayed.

3Pan/Tilt button

Click these buttons to change the angle of the lens in eight directions down, left, right and diagonally.

4Speed

The operating speed of the camera can be adjusted to seven speeds.

5ZOOM/FOCUS/IRIS switch buttons Click to adjust the zoom, focus or iris. (The selected button turns green.)

6ZOOM/FOCUS/IRIS adjustment button (-/+)

•ZOOM: + (Zoom In), – (Zoom Out)

•FOCUS: + (Far), - (Near)

•IRIS: + (Open), - (Close)

7Auto focus button (AF)

8SEQ/PAN/TOUR switch buttons

Click to switch between sequence, auto-pan and tour.

9Preset buttons

Click to change the angle of the camera to the position recorded in the preset number.

To select a preset number higher than "09" (09 - 64), use the pull down menu and click .

FPresetting a position

To preset a position, choose a preset number using the

pull down menu and click . The preset position is recorded.

GRecording operation buttons

: Starts a manual recording.

: Stops a manual recording.

: Switches to timer recording functions.

HDisconnect button

Disconnects the connection with the DVR and changes from network operation to DVR operation.

English

21