Setting up the Basic Menu Using Network Operations | (User level: ID3) |
|
|
|
|
The DVR operating condition is usually set through the DVR. However, the following basic operation menu allows you to set the DVR using the computer.
Basic Settings Menu Outline
b Initial setting | b General settings | |
A CLOCK SET (Refer to P24) | A DISPLAY SET (Refer to P32) | |
Setting the DVR’s clock | To set the information display for the connected | |
B SUMMER TIME SET/EXT. CLOCK SET (Refer to | monitors. | |
| ||
P24) | B BUZZER SET (Refer to P32) | |
To set the automatic summer time change and the | Warning buzzer settings | |
automatic setting of the connected DVR clock. | C HDD SET (Refer to P33) | |
| ||
C HOLIDAY SET (Refer to P24) | To set HDD information display and specify the | |
To set dates that will be considered as holidays. | playback disk when 2 HDD units are connected. | |
b Recording settings | D NETWORK SET (Refer to P34) | |
To set the network connection conditions and the | ||
A RECORDING AREA SET (Refer to P25) | ||
connection password. | ||
To display the proportion of each recording area and | ||
E | ||
set the recording resume operation when recording | ||
DVR interface information display when operating the | ||
was stopped due to the recording exceeding the area | ||
capacity. | system controller | |
B RECORDING CONDITIONS SET (Refer to P26) | b Screen settings and DVR information | |
To choose overwriting and other hard disk related | A MASK SET (Refer to P35) | |
condition settings. | ||
Mask settings for specific channels | ||
C NORMAL REC MODE SET (Refer to P27) | ||
B POWER LOSS/USED TIME (Refer to P35) | ||
Normal and | ||
Power loss history, operating time, firmware version, | ||
settings. | ||
etc. information display | ||
D PROGRAM REC SET (Refer to P28) | ||
C INITIALIZATION LOG (Refer to P35) | ||
To program the individual or the combined recording | ||
Hard disk initialization history information display | ||
rate of the recording cameras | ||
| ||
E TIMER SET (Refer to P28) |
| |
| ||
F ALARM REC MODE SET (Refer to P30) |
| |
Alarm recording and |
| |
settings |
|
The setting menus outside the ones above are outside the scope of network operations. Therefore, use the DVR to set any other settings.
22 | English |