
Screen settings and DVR information | (User level: ID3) |
|
|
|
|
A grey pattern can be set on a specified channel used to watch live video or play back images to protect confidentiality and privacy.
1
2
3
(Example screen for the
1MASK (Initial setting: OFF) To choose mask settings.
Choosing "ON" allows you to set a grey pattern on each of the channels of the main monitor, monitor 2 and network.
2TIME PERIOD (Initial setting:
Selections:
The parentheses of
3Setting the mask portion for each monitor (Initial setting: OFF)
You can set the grey pattern for each channel of each of these 3 monitors.
•MAIN MONITOR represents the screen of the main monitor connected to the DVR.
•MON. 2 represents the screen of the spot monitor connected to the DVR.
•NETWORK represents the main screen of the computer used for network operations.
NETWORK mask settings can only be programed by ID1 users. ID2 and ID3 users can watch the images on all channels.
Displays the information concerning power loss/used time and firmware version information.
1
2
3
1POWER
The number of power failure and the four most recent power failure records (Date and time of failure/recovery) are displayed.
2USED TIME
The used time of each disk (DISK1 USE, DISK2 USE) and the total amount of electricity time (POWER) are displayed.
3FIRMWARE
Displays the firmware version of the firmware currently mounted on the DVR.
CINITIALIZATION LOGThe eight most recent occurrences among the initializing and recording restart records of the DVR's hard disk are displayed.
12
1DATE/TIME: Displays the date and time of the operation.
2AREA: Displays the recording area for the operation.
The messages "INITIALIZED", if the computer was initialized and "AREA RESET" if the recording area became full and recording was restarted, are displayed in parentheses next to the recording area.
English | 35 |