Recording settings | (User level: ID3) |
|
|
|
|
|
|
It allows you to set HDD recording area management conditions such as overwrite recording, remaining disk warning level, automatic erase function, etc.
1
2
3
4
1OVERWRITE (Initial setting: ON)
Setting recording conditions to overwrite for the normal and alarm recording areas.
ON:
When the hard disk becomes full, recording continues and data is automatically overwritten from the first images.
The [AREA FULL RESET] button of the normal or alarm recording area does not appear on the RECORDING AREA SET screen.
OFF:
The remaining capacity warning indicator of the DVR starts blinking when the recording area becomes full, recording stops.
By setting [OVERWRITE] to "ON" when recording for a long time and the recording area becomes full, the data will be overwritten and erased sequentially from the oldest images. Save necessary images before they are overwritten.
3SERIES REC (Initial setting: OFF)
Series recording can be set if the multiple DVR units are connected using the SERIES REC terminal at the rear panels.
Series recording implies that recording can automatically continue on the next DVR unit when the recording area of the first DVR becomes full.
ON: Performing series recording.
OFF: Series recording is not activated.
Series recording is only available when [OVERWRITE] is set to "OFF".
4AUTO DELETE (Initial setting: OFF)
It is the automatic erase function of the images saved in the normal and alarm recording area. The image data that is older than the specified storage period are automatically erased.
Selections: OFF, 1, 2, 3 ... 99 DAYS
1 - 99 DAYS: To set the auto delete function and storage period between 1 and 99 days.
OFF: The images will not be erased automatically.
•The auto delete function does not apply to the archive area.
•If you use the auto delete function, copy or download important data before the storage period expires. (Refer to P18, 19)
2REMAINING DISK WARNING
The remaining disk warning buzzer can be programed to go off when the remaining space available reaches a specified value if the [OVERWRITE] setting is set to "OFF" for the normal and alarm recording area.
Now, setting the remaining disk warning level that will set the warning buzzer on. The set level will apply to both the normal and alarm recording areas.
Available settings: 1 - 10%
When the [OVERWRITE] setting of the normal and alarm recording area is set to "ON","***" is displayed, the remaining disk warning level cannot be set.
26 | English |