Recording settings

(User level: ID3)

 

 

 

 

 

 

DPROGRAM REC SET

If multiple cameras are connected to the DVR, the recording rate of each camera can be set individually.

4 recording settings can be preset (P-1 - P-4). Pre-programed settings can be used for NORMAL REC MODE SET and TIMER SET.

1

2

4

3

(Example screen for the 16-channel model)

1PROGRAM

Specify a program number and set the recording rate for an individual camera using 2. Different recording rates can be set for each program.

Selections: P-1, P-2, P-3, P-4

2SELECT INDIVIDUAL CAMERA RATE (FPS) Select the recording rate for an individual camera.

By setting the rate of an individual camera rate to "OFF", no images are recorded even if a camera is connected.

Available settings:

OFF, 25, 12.5, 6.25, 3.125, 1.563, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Unit: FPS)

3[SAVE] button

Clicking [SAVE] will save the settings of the selected program.

4NORMAL REC

Once the program has been saved the estimated normal recording time is displayed.

•The menu screen may vary according to the DVR model.

•Recording rates available are limited when pre-alarm recording or mirroring is set to "ON". Refer to the DVR manual for more information.

ETIMER SET

It allows you to set the recording conditions for timer recording.

1 2 3 4 5

7

6

8

1WEEK

To set the day for the timer-controlled recording.

To set the timer recording to the same time every day set to "DLY".

2START/STOP

Set the timer recording start and stop time.

3PROGRAM (Initial setting: OFF)

You can select a program that has been preset (P-1 - P-4) using PROGRAM REC SET.

4FPS (Initial setting: 12.5 FPS)

To set the recording rate of the timer recording. If the rate was set using [PROGRAM], the preset recording rate will be used.

5SET (Initial setting: OFF)

Select "ON" to enable the settings programed in this row. The timer recording will start and stop accordingly. Multiple timer controlled recording periods may be used to divide recording times according to the conditions set.

6EXT

If using an external timer set 3, 4 and 5.

The recording will occur according to the incoming signal of the external timer. There is no need to set the day or start and stop time.

7[OVER 24H] button

When recording continuously for a period of over 24 hours using the timer recording, click this button to display the appropriate program screen.

8[SAVE] button

Clicking [SAVE] will save the timer settings.

28

English