Sanyo dsr-3706pa 3Network Operation Screen Display, click, English, operation screen and click, 2 Enter the user name and password and then

Network Connection Procedure

3Network Operation Screen Display

When the DVR and computer settings are complete, start the Web browser on the computer. The browser should be Internet Explorer Ver. 5.5 SP2 or higher.

If the computer accesses the DVR following the procedure below, the screen will change to the network operation screen.

1 Enter the connection URL in the address bar of the browser.

Enter the DVR IP address set in NETWORK SET after http:// and press the [Enter] key. The authentication check dialog box will display.

When PORT is set to a different value from the initial "80" append a colon (:) and a PORT number after the IP address.

<Example when setting PORT to 81>

http://192.168.0.1:81/

2 Enter the user name and password and then

click .

If the user name and password are entered correctly, the connection to the DVR will complete and the language selection screen will display.

•There is no distinction between uppercase and

lowercase.

•If [Remember my password] is checked after entering the user name and password, entering the password when connecting can be omitted the next and subsequent times.

•Because the authentication check dialog box is displayed when an operation outside the rights is performed after connecting, it is also possible to increase the user level while maintaining a connected state. Cases when there are restrictions on the connection rights due to restrictions on the number of simultaneous connections or network settings are excluded from this. (Refer to P6)

3 Select a display language from the network

operation screen and click .

The screen will switch to the main screen and network operations from the computer will be enabled.

Language selection:

English, French, German, Spanish

•Concerning the time setting of the DVR

If the current date and time are not set properly on the DVR, basic operations such as normal recording, timer controlled recording, camera control will not be available. It will also hinder the setting of other menus related to time and date. Therefore, please verify whether the current date and time are properly set on the DVR using the CLOCK SET screen. (Refer to P24)

•If [NETWORK STATUS] is "ON" in NETWORK SET of this device when changing to network operation, the message " NETWORK CONTROL" will be displayed on the screen of the monitor connected to the DVR.

•When "Run Time Error" of Java Script displays while using Internet Explorer

Select the menus in the following order [Tools] → [Internet Options] → [Advanced Settings] and then remove the check mark of "Display notification for each script error" in the browser settings. Check "Do not use script debugging".

•When a portion of the image is not displayed due to performance or specifications of the computer.

Within Internet Explorer select from the menus in the following order [Tools] → [Internet Option] → "Temporary Internet Files" and then set [Amount of disk space to use] to less.

English 5