Recording settings | (User level: ID3) |
|
|
|
|
|
|
It allows you to set the alarm recording and the
1 |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |||
2 |
|
|
|
|
|
|
|
|
|
|
| ||
3 |
|
|
|
| A | B | |||||||
|
|
|
| ||||||||||
4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A |
|
| B | ||||||
|
|
|
|
|
|
|
| ||||||
1ALARM RECORDING (Initial setting: OFF) To set the alarm recording operation mode.
Selections:
OFF: No alarm recording.
ENABLED:
Enables alarm recording at any given point in time regardless of timer recording.
Records alarm recording only during timer controlled recording operation.
Records alarm recording outside timer controlled recording operations.
OLY
Records alarm recording only during the time slot set for the timer controlled recording.
(Even if a timer controlled recording is set, the standby mode of the timer controlled recording is not activated.)
2PICTURE QUALITY (Initial setting: ENHANCED)
It allows you to set the quality of the image recorded by the DVR.
Selecting a high quality image will result in shortened recording time.
Selections:
BASIC (Basic image quality)
NORMAL (Standard image quality)
ENHANCED (Enhanced image quality)
FINE (Fine image quality)
SUPER FINE (Super fine image quality)
3AUDIO RECORDING (Initial setting: OFF)
Audio data can be recorded at the same time as image data.
4ALARM INTERLEAVE (Initial setting: ONLY)
Setting the recording pattern when multiple cameras are connected to the DVR.
Selections:
ONLY:
Records only the images of the camera that detected the alarm.
SW:
Records the images of the camera that detected the alarm and the images of the other cameras alternately.
The
CH1 → CH2 → CH1 → CH3 → CH1 → CH4 → CH1 → CH5 → CH1 → CH6
AREC RATE (Initial setting: 12.5 FPS)
To set the recording rate of the alarm recording. The letter "A" is displayed in front of the available recording rate when AUDIO RECORDING is set to "ON".
Available settings:
25, 16.67, 12.5, 8.333, 6.25, 5, 4.167, 3.571, 3.125, 2.778, 2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Unit: FPS)
BDURATION (Initial setting: 20 SEC)
It allows you to set the duration of the recording once the alarm has been triggered.
Available settings:
5, 10, 20, 40 SEC, 1, 2, 3, 4, 5, 10, 15 MIN, CC
CC:Records only when an alarm is detected. One alarm will start a recording of at least 5 seconds.
ON: Audio recording on.
OFF: Audio recording off.
•Audio data is recorded in the same recording area as the images. Therefore, recording time is shortened.
•If recording audio, set the recording rate between "1 - 25 FPS".
30 | English |