Network Connection Procedure

To operate the DVR through a network, first setup the DVR and computer and then perform the predetermined connection operations using the computer.

1NETWORK SET Settings of DVR

Select NETWORK SET from the main menu of the DVR and make the following settings to allow the DVR to work with a network connection. Refer to the instruction manual of the DVR for details.

1

 

 

 

 

 

<NETWORK SET>

 

 

 

 

 

NETWORK CONTROL

: OFF

 

 

 

 

 

 

2

 

 

 

 

NETWORK STATUS

: ON

 

 

 

 

 

 

 

3

 

 

 

 

IP ADDRESS

: 192.168.

0.

1

 

 

 

 

 

 

 

 

SUBNET MASK

: 255.255.255.

0

 

 

 

 

4

 

 

 

 

GATEWAY

: 0. 0.

0.

0

 

 

 

 

 

 

 

 

PORT

: 00080

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ID

PASSWORD (4-8)

 

5

 

 

 

 

 

 

ID1

: 1111----

 

 

 

 

 

 

 

 

ID2

: 2222----

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ID3

: 3333----

 

 

1NETWORK CONTROL

To use network operation change to "ON (NETWORK)" or "ON (DVR)".

Selections:

•ON (NETWORK):

Gives priority to network operations and allows all users (ID1 to ID3) to access.

•ON (DVR):

Gives priority to DVR operations and limits the users who can access the network to ID1 users only.

•OFF:

Network operations are not allowed.

2NETWORK STATUS

Sets whether or not the "NETWORK CONTROL" message will display on the monitor connected to the DVR when connected to the network.

3IP ADDRESS/SUBNET MASK/GATEWAY Set each item in a range of 0 to 255.

Ask the network administrator for IP addresses and subnet masks required to set the network.

4PORT

Normally set to "80".

5ID/PASSWORD

An individual PASSWORD can be set according to the operation authority.

The IP address, subnet mask, gateway, port, and password settings can be changed using the computer. (Refer to P34)

2TCP/IP Settings of the Computer

Setup TCP/IP according to each OS for the computer being used.

The setup example shown below is for Windows XP.

1 Click [Network and Internet Connections] of [Control Panel].

The "Network and Internet Connections" screen will display.

2 Click [Network Connections].

The "Network Connections" screen will display.

The settings of the LAN card being used (Ethernet adapter) display in the [LAN or High-Speed Internet] column.

English

3