Viewing live video using various multi screens

Automatic screen scrolling

AAutomatic full-screen scrolling

Press the SEQUENCE button.

The live surveillance video scrolls through the cameras in the order of the camera numbers.

To stop the automatic scrolling, press the SEQUENCE button once again.

SEQUENCE

01

15

02

16

Viewing on the monitor connected to the MON2 terminal

Connect a monitor to the MON2 terminal on the rear panel. The display is full-screen only. (P10)

While the main monitor is used in split-screen mode, the monitor 2 connected to the MON2 terminal can be used to view full-screen video from a single camera or to automatically scroll through video from all cameras.

1Press the MON2 button, and then the camera selection button (example 4).

The image from Monitor 2 is displayed on channel 4 (04).

MON 2

4

☞Refer to P76 for information about setting the automatic scrolling interval for the cameras.

BAutomatic quad-screen scrolling

1Press the QUAD button.

The live video is displayed in quad-screen mode.

QUAD

2Press the SEQUENCE button.

The monitor display switches to quad-screen mode. To stop the automatic scrolling, press the SEQUENCE button once again.

SEQUECNE

01

02

13

14

03

04

15

16

01

04

2Press the SEQUENCE button.

Monitor 2 switches to full-screen automatic scrolling. To stop the automatic scrolling, press the SEQUENCE button once again.

SEQUENCE

(Monitor 2)

01

15

02

16

Press the MON2 button to stop surveillance on Monitor 2.

• The MON2 button cannot be used during menu display.

•Recorded video cannot be viewed on the monitor connected to MON2.

☞ DSR-3709PA: The order of quad-screen images is 1~4,

☞ When an alarm is detected, the corresponding live

video can be viewed on Monitor 2.

5~8, 9~3.

See P60.

 

English

How to use 16