Viewing recorded video

(Normal recording area)

This DVR can play video that has already been recorded or currently being recorded in the normal recording area (by normal or timer-controlled recording).

Normal recording area

(Hard disk recording areas)

Playback

Full-screen viewing

1Press the PLAY/STOP button.

Video stored in the normal recording area is played back from the starting point of recording. The " " symbol appears in the operation display area.

26-10-06 09:30:00 REC REPEAT EN A ARCHIV 0001

PLAY/STOP

02

•If the start point of the recording becomes unknown due to deleting video or resetting, then video playback will start from the earliest recording.

•After being paused or stopped, playback resumes from the stop point.

Playback is possible during recording.

If the PLAY/STOP button is pressed during recording, the video playback will begin from the start point of recording. When playing video near the point of recording, video playback may pause temporarily.

PLAY/STOP

•When playback ends, the DVR pauses automatically, and the STILL indicator turns on. The " " symbol appears in the operation display area.

2Press the camera selection button (example 2, 9) to play the video of the desired camera.

02

09

2

9

Maintaining the speed of fast-forward or fast-reverse

Press the SHUTTLE HOLD button while turning the S-dial for fast-forward or fast-reverse.

The speed will be maintained even after the S-dial is released.

SHUTTLE HOLD

3Press the PLAY/STOP button to end the playback.

Fast-forward/fast-reverse during playback

Turn the S-dial clockwise for fast-forward.

The " " symbol appears in the operation display area.

26-10-06 09:30:00 REC REPEAT EN A ALARM 0000

Turn the S-dial counterclockwise for fast-reverse.

The " " symbol appears in the operation display area.

26-10-06 09:30:00 REC REPEAT EN A ALARM 0000

☞Release the S-dial for normal playback.

English

How to use 18