General settings

G-2Camera control from the DVR

 

4 5

6

7 8

G

 

A

 

 

 

 

MENU

ENTER

AF

 

 

 

 

IRIS

 

PRESET

AUTO PAN

 

 

 

 

 

 

FOCUS

 

SEQUENCE

TOUR

 

 

 

 

 

 

ZOOM/I/FO

PAN

 

 

 

 

1 2 3

 

9 F

H

bCamera control is not possible in the following cases, even if the function indicator (FUNC.) is ON.

While displaying menus, or the search menu

During playback (during pause, or copy menu is display)

During quad-screen, multi-screen (9/16) and plus screen display

During zooming, automatic scrolling and monitor 2 display

bIf another button is pressed while the following indicators are blinking (controllable state), the control function will be automatically cancelled.

PRESET, IRIS, FOCUS indicators

APress the FUNC. button.

While the FUNC. indicator is ON, the dome cameras can be operated by using the control buttons listed under 1 ~ H.

1 Preset button (PRESET)

9 Focus button (FOCUS)

English

When the PRESET button is pressed followed by the camera selection button, the lens moves to the preset position, and the preset call is cancelled.

Pressing the PRESET button for approximately 3 seconds will activate the registration status. Pressing on the camera selection button allows you to register it.

2Sequence button (SEQUENCE)

The cameras will start automatic sequence operation. If another button is pressed, the automatic sequence operation will be cancelled.

3Tour button (TOUR) Performs tour operation.

If another button is pressed, the tour operation will be cancelled.

4Automatic panning button (AUTO PAN)

Performs automatic panning. If another button is pressed, panning will stop.

5Menu button (MENU)

Displays the camera's internal menu on the monitor.

6Confirmation button (ENTER)

This button is used to confirm the contents of the menu screen.

7Autofocus button (AF)

Use this button to adjust the focus with one touch.

8Iris button (IRIS)

Use this button to switch to iris adjustment mode; the IRIS indicator will start blinking.

Press the "ZOOM/I/FOo" button to close the iris, and press the "ZOOM/I/FOp" button to open the iris.

Press the IRIS button once again to exit the iris adjustment mode.

Use this button to switch to focus adjustment mode; the FOCUS indicator will start blinking.

Press the "ZOOM/I/FOo" button to set the focus on nearby objects, and press the "ZOOM/I/FOp" button to set the focus on far-off objects.

Press the FOCUS button once again to exit the focus adjustment mode.

FZoom/Iris/Focus button (ZOOM/I/FO)

Press the "o" button to shrink the screen, and press the "p" button to enlarge it.

GPan dial (PAN) Performs panning.

Turn the PAN dial clockwise to move the lens to the right, and turn it counterclockwise to move the lens to the left. Larger turning angle results in faster movement; and smaller turning angle results in slower movement.

HTilt dial (TILT) Performs tilting.

Turn the TILT dial clockwise to tilt the lens down, and turn it counterclockwise to tilt the lens up.

73 How to set