Recording settings

GAlarm recording settings menu description

The following settings can be performed under the alarm recording settings.

 

 

 

 

<ALARM REC MODE

SET>

 

 

1

 

 

ALARM RECORDING

: OFF

 

 

 

 

 

 

2

 

PICTURE QUALITY

: ENHANCED

 

 

 

 

 

3

 

 

AUDIO RECORDING

: OFF

 

 

 

 

 

 

4

 

ALARM INTERLEAVE

: ONLY

 

6

 

 

5

 

 

 

REC RATE: 12.5FPS,

 

DURATION: 20SEC

 

 

 

 

 

 

7

 

PRE-ALARM RECORDING

: ***

 

 

9

 

 

 

8

 

 

 

REC RATE: **** FPS,

 

DURATION: ****

 

 

 

 

 

 

 

 

F

 

 

=> (01731 ALARMS CAN BE RECORDED)

 

 

 

 

 

 

G

 

ALARM TRIGGER

: ALARM

 

 

 

 

 

H

 

 

MOTION SENSOR

 

->

 

 

 

 

 

 

 

 

1ALARM RECORDING

Turns alarm recording ON or OFF, and whether alarm recording should be performed during timer-controlled recording.

When "OFF" is selected, the settings up to PRE-ALARM RECORDING are disabled.

Selections:

OFF: Alarm recording is not performed.

ENABLED:

Alarm recording is performed, regardless of timer-controlled settings.

AL-REC ON TIMER:

Alarm recording is performed only during timer-controlled recording.

AL-REC OFF TIMER:

Alarm recording is performed only when timer-controlled recording is not.

OLY AL-RC ON TMR:

Alarm recording is performed only during the period specified by the timer setting. If this setting is selected, timer-controlled recording, and the TIMER button will be disabled.

2PICTURE QUALITY

Select the picture quality of the recordings.

Selections:

BASIC/NORMAL/ENHANCED/FINE/SUPER FINE

G-1Alarm recording (P56)

These settings control the picture quality, audio recording and recording rate for the alarm recording area, when an alarm is detected.

G-2Pre-alarm recording (P57)

These settings control the recording rate and the duration for pre-alarm recording.

G-3Alarm trigger (P57)

Selects the alarm detection method.

G-4Motion sensor (P58)

5REC RATE

The following settings can be selected:

Selections:

25, 16.67, 12.5, 8.333 ,6.25, 5, 4.167, 3.571, 3.125, 2.778, 2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5, 0.333, 0.25, 0.2, 0.1, 0.05, 0.033

Audio recording can only be set when this setting is within the range of 25~1 FPS.

6DURATION

Selects the recording duration for a single alarm event from the following selections:

5SEC/10/20/40/1MIN/2/3/4/5/10/15/CC

CC: Recording is performed as long as the alarm is present (minimum 5 sec).

7PRE-ALARM RECORDING

OFF: Pre-alarm recording is not performed.

ON: Pre-alarm recording is performed.

8REC RATE

Refer to the pre-alarm recording time under recording rate settings. (P88)

9DURATION

Refer to pre-alarm recording time. (P88)

English

3AUDIO RECORDING

Audio recording can be switched ON or OFF.

Audio recording can only be set if the recording rate is in the range of 25~1 FPS. When audio recording is selected, an "A" is displayed in front of the recording rate. Since both audio and video will be stored in the alarm recording area, the recording capacity of this area will decrease.

If the recording rate is out of this range, audio recording will not be performed; even if audio recording was set.

4ALARM INTERLEAVE (recording pattern)

Selections:

ONLY: Records only the live video where the alarm occurred.

SW: Alternately records the live video from the camera where the alarm occurred and the live video from all connected cameras.

FALARMS CAN BE RECORDED (number of alarms that can be recorded)

GALARM TRIGGER

Selects the alarm detection method from the followings:

Selections:

ALARM:

Performs alarm recording when an external alarm is detected.

SENSOR:

Performs alarm recording when a motion sensor detects movement. (P58)

ALARM AND SENSOR:

Performs alarm recording when an external alarm and a motion sensor alarm are detected simultaneously.

ALARM OR SENSOR:

Performs alarm recording when either an external alarm or a motion sensor alarm is detected.

HMOTION SENSOR

Displays the motion sensor setting screen.

55 How to set