General settings
D | Hard disk settings menu description |
| Hard disk initialization | |
|
|
|
|
|
|
|
|
| <HDD SET> |
|
|
|
1 |
|
|
| DISK1 | : | 82GB | |
|
|
| |||||
2 |
|
| DISK2 | : | |||
|
| ||||||
3 |
|
|
| DISK INITIALIZE |
|
| |
|
|
|
|
| |||
CAUTION : ALL RECORDING WILL BE ERASED!
4 |
|
| MIRRORING | : | OFF | |
|
| |||||
5 |
|
| PLAYBACK DRIVE | : | *** | |
| ||||||
CAUTION : RECORDING SPEED WILL BE
LIMITED BY MIRRORING!
L
1DISK1
Displays the total capacity of the internal hard disk. If the hard disk is replaced, the capacity may change.
2DISK2
Displays the total capacity of the second hard disk, if it was installed in the DVR.
3DISK INITIALIZE
This item is used to initialize the internal hard disk. All recordings are erased when the hard disk is initialized.
The initialization is performed on DISK1 and DISK2 simultaneously.
4MIRRORING
If another hard disk is installed, and MIRRORING is turned "ON", then a PLAYBACK DRIVE can be selected, and the same video will be recorded on both hard disks. If a writing error occurs, one of DISK1 and DISK2 can be used to read the recordings.
•Note that if MIRRORING is turned "ON", the recording rate will be automatically limited (to half of the normal recording rate).
•If a playback problem occurs while MIRRORING is ON, change the hard disk used for playback by selecting DISK1 or DISK2 at the "PLAYBACK DRIVE" setting.
5PLAYBACK DRIVE
Use this setting together with MIRRORING, to designate one of the two hard disks for video playback. Selections: DISK1/DISK2
1Display the <HDD SET> screen using "Displaying the general settings screen". (P62)
The cursor moves to "DISK INITIALIZE".
MENU | <MAIN MENU> | ||
|
|
| |
| 3.GENERAL SET |
|
|
| <GENERAL SET> | ||
| 4.HDD SET |
|
|
(J) | (S) |
|
|
| <HDD SET> |
|
|
| DISK1 | : | 82GB |
| DISK2 | : | |
| DISK INITIALIZE |
| |
CAUTION : ALL RECORDING WILL BE ERASED!
2Turn the
The <WARNING> screen is displayed, and "NO" is blinking.
3Turn the
The "HDD INITIALIZING !" message appears, and the initialization starts.
When the initialization is complete, the <HDD SET> screen returns.
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
NO
CHANGE:JOG SET:SHUTTLE
HDD INITIALIZING !
4Press the EXIT/OSD button.
EXIT/OSD
☞Hard disk expansion
Before installing another hard disk, consult with the store where you purchased your system.
We recommend using the expansion hard disk provided by SANYO. Operation is not guaranteed if a hard disk other than SANYO's recommended type is used for capacity expansion.
•The hard disks must be initialized, upon installing an expansion disk. The initialization is performed on the two hard disks simultaneously. Save your recordings on a CompactFlash card or other media before the initialization.
English
How to set 68