Safety precautions
Follow the points outlined below for proper use
bHard disk
This unit is loaded with a hard disk drive. Stored data on this unit may be damaged/lost through
Follow the items outlined below when placing, transporting, and operating this unit.
Warning
GThis unit is designed to be positioned horizontally. Do not position vertically.
GDo not expose to shock or vibration and do not transport while power is turned on.
Always turn the power off, even when moving in and out of racks.
GDo not remove the power cable while recording or playing back.
GDo not move the unit for approximately 30 seconds after turning the power off.
The hard disk is rotating for a short duration after the power is turned off. The unit is further susceptible to damages through shock and vibration in this state compared to when the power is turned on. Do not move it.
GDo not expose to shock or vibration.
Avoid placing this unit directly on the floor. Make sure that the four stands attached to the base of this unit are used, when placing it on the floor.
GAlways use the original packaging (packaging provided at the time of purchase), when delivering. Use the packaging materials provided during the original purchase when the unit or a single internal component is going to be delivered. Deliver using a method that causes the least amount of shock and/or damage to this unit.
Cooling fan
Warning
GInspecting for abnormalities in the hard disk drive and the cooling fan
This unit is designed to automatically check the drive and cooling fan when the power is turned on. Replacement parts will be necessary if abnormalities are detected. Images will have to be saved and initialization will have to take place if there is a fault with the drive. Consult the dealership where this unit was purchased for details.
GWear in the hard disk drive and the cooling fan
The hard disk drive and cooling fan are consumable items.
Replace the parts stated below when using the unit in a 25°C environment. The replacement timings listed are approximate and do not guarantee the performance or life expectancy of the part in question.
•Hard disk: 2 years
•Cooling fan: 3 years
•Damper: 2 years
Consult the dealership where the unit was purchased for replacement drives.
•The drive is vulnerable to static electricity shocks. Take the appropriate measures to prevent exposure to static electricity.
•Unpackaged drives should be placed horizontally with their base facing upwards on top of a soft cloth. Exposing the drive to shocks and vibration may cause breakdowns.
•Do not expose the drive to shocks and vibrations while removing/tightening the screws during replacement. Firmly tighten the screws after replacement.
English
5 Foreword