Recording settings

H-1Alarm operation settings

1Display the <ALARM OPERATION SET> screen as explained in "Displaying the recording settings screen", and then turn the S-dial clockwise. (P39)

The "OFF" indicator of ALARM RETRIGGER starts blinking.

MENU

<MAIN MENU>

 

2.RECORD SET

<RECORD SET> 8.ALARM OPERATION SET

(J)(S)

<ALARM OPERATION SET>

ALARM RETRIGGER

: ON

MAIN MON. DISPLAY

: FULL

ALARM PRIORITY

: LAST

MON.2 DISPLAY

: NC

2Turn the J-dial, select "ON" for ALARM RETRIGGER, and turn the S-dial clockwise.

The cursor moves to "MAIN MON. DISPLAY".

3Press the EXIT/OSD button when the settings are complete.

Operation returns to the normal screen.

EXIT/OSD

H-2Alarm display settings

1Turn the J-dial, select "MAIN MON. DISPLAY", and turn the S-dial clockwise.

Selections: FULL/9/16/NC

The "FULL" indicator of MAIN MON. DISPLAY starts blinking.

 

 

<ALARM OPERATION SET>

 

 

ALARM RETRIGGER

: OFF

(J)

(S)

MAIN MON. DISPLAY

: FULL

ALARM PRIORITY

: LAST

 

 

 

 

MON.2 DISPLAY

: NC

2Turn the J-dial to select FULL (example), and then turn the S-dial twice clockwise.

Selections: LAST/FIRST/SWITCH

The "LAST" indicator of ALARM PRIORITY starts blinking.

3Turn the J-dial to select "FIRST", and then turn the S-dial twice clockwise.

The "NC" indicator of MON.2 DISPLAY starts blinking.

4Turn the J-dial, select "LAST", and then turn the S-dial clockwise.

The cursor moves back to the ALARM RETRIGGER field.

5Press the EXIT/OSD button when the settings are complete.

Operation returns to the normal screen.

EXIT/OSD

English

bAlarm cancellation

•Forced cancellation of an alarm operation in progress Press the camera selection button of the channel with the alarm for about 3 seconds.

•Cancellation by a switch when alarm is detected Install a switch between the ALARM RESET and the C (ground) terminal of the terminal block on the rear panel, and turn on the switch when an alarm is detected.

ALARM RESET

C

61 How to set