Recording settings

DNormal recording area menu description

This menu is used to set the picture quality, audio recording and recording rate for the normal recording area. A program number can be selected at the programmed recording settings to use the recording rate set for that program. (P50)

 

 

 

 

 

 

 

 

<NORMAL REC MODE SET>

1

 

 

 

 

PICTURE QUALITY

: ENHANCED

 

 

 

2

 

 

 

 

AUDIO RECORDING

: OFF

 

 

 

3

 

 

 

 

 

REC

RATE : 12.5FPS ( 42H)

 

 

 

 

4

 

 

 

 

REC

PROGRAM GROUP

: OFF

 

 

 

 

1PICTURE QUALITY

Selects the picture quality used to record video in the normal recording area. The recording duration will change according to the selected picture quality.

Selections:

BASIC: Rough image quality (BA)/15kB

NORMAL: Normal image quality (NO)/22kB

ENHANCED: Enhanced image quality (EN)/30kB

FINE: Fine image quality (FI)/42kB

SUPER FINE: Super fine image quality (SF)/50kB

2AUDIO RECORDING

•When the AUDIO RECORDING is set to "ON", the letter "A" will be displayed in front of the available recording rates (REC RATE). Audio recording is possible when the total recording rate of the cameras is within the range of A50~A1FPS.

•Audio will only be played when the playback speed is the same as the rate of recording. Video and audio may slightly be out of synch.

D-1Normal recording area settings

1Display the <NORMAL REC MODE SET> screen as explained in "Displaying the recording settings screen", and then turn the S-dial clockwise. (P39)

The PICTURE QUALITY "ENHANCED" starts blinking.

MENU

<MAIN MENU>

 

 

 

2.RECORD SET

 

 

<RECORD SET>

 

4.NORMAL REC MODE SET

(J)

(S)

 

 

<NORMAL REC MODE SET>

 

PICTURE QUALITY

: ENHANCED

 

AUDIO RECORDING

: OFF

 

REC RATE : 12.5FPS ( 42H)

 

REC PROGRAM GROUP

: OFF

2Turn the J-dial to select the desired PICTURE QUALITY (example: FINE), and then turn the S-dial twice clockwise.

The AUDIO RECORDING "OFF" field starts blinking.

3Turn the J-dial to select the desired AUDIO RECORDING (example: ON), and then turn the S-dial twice clockwise.

The letter "A" is displayed indicating AUDIO RECORDING, and then the REC RATE starts blinking.

4Turn the J-dial to select the desired REC RATE (example: 6.25), and then turn the S-dial twice clockwise.

The REC PROGRAM GROUP "OFF" starts blinking.

3REC RATE

The recording rate is limited by the pre-alarm and mirroring settings. (P88)

☞ Refer to the recording rate and duration table. (P86)

4REC PROGRAM GROUP (P50)

This menu is used to specify the cameras to be used in each group (P-1~P-4) for programmed recording. After selecting the group, set the program for the group.

Selections: OFF, P-1, P-2, P-3, P-4

5Turn the J-dial to select the desired REC PROGRAM GROUP (example: P-1), and then turn the S-dial clockwise.

REC RATE will be displayed as ***.

6Press the EXIT/OSD button to end the setting procedure.

The operation display area displays the settings as shown below.

EXIT/OSD

English

49 How to set