Sanyo DSR-3709PA Recording settings

Recording settings

Menu configuration

bDisplaying the recording settings screen

1 Press the MENU button and use the

J-dial to select "2. RECORD SET", and then turn the S-dial clockwise. The <RECORD SET> screen appears.

MENU

	<MAIN MENU>
1.INITIAL SET		->
2.RECORD	SET	->
3.GENERAL SET		->
4.SCREEN	SET	->

(S)

2 Turn the J-dial, select the desired

submenu, and turn the S-dial

clockwise.

The selected screen (A~H) is

<NORMAL REC	EASY SET>
RECORDING DURATION	BASE	->
REC RATE BASE		->
CAUTION !
CONNECT CAMERA	AND SET TIME
BEFORE SETUP

<RECORDING AREA SET>
TOTAL CAPACITY	:	82GB
NORMAL RECORDING AREA	:	80	%
AREA FULL RESET	->
ALARM RECORDING AREA	:	19	%
AREA FULL RESET	->
ARCHIVE AREA	:	1	%
AREA FULL RESET	->

CAUTION : WHEN THE AREA SETTING IS CHANGED, THE WHOLE AREA WILL BE INITIALIZED !

AEasy recording settings

(P40)

The recording duration or rate can be selected.

Easy recording settings 1:

Sets the standard recording duration

Easy recording settings 2:

Sets the standard recording rate

BRecording area settings

(P43)

Displays the total capacity of the internal hard disk. The recording capacity for each area (normal, alarm recording and archive) can be set.

displayed. Refer to the appropriate
pages for the settings.
(J)	(S)

<RECORD SET>
1.NORMAL REC EASY SET		->
2.RECORDING	AREA SET	->
3.RECORDING	CONDITIONS SET	->
4.NORMAL REC MODE SET		->
5.PROGRAM REC SET		->
6.TIMER SET		->
7.ALARM REC	MODE SET	->
8.ALARM OPERATION SET		->
MOVE:JOG	SELECT:SHUTTLE

<RECORDING CONDITIONS SET> NORMAL RECORDING AREA

OVERWRITE: ON

ALARM RECORDING AREA
OVERWRITE	: ON
REMAINING DISK WARNING	: **
SERIES RECORDING	: OFF
AUTO DELETE	: OFF

		<NORMAL REC MODE SET>
PICTURE QUALITY			: ENHANCED
AUDIO RECORDING			: OFF
REC	RATE	: 12.5FPS ( 42H)
REC	PROGRAM GROUP		: OFF

		<PROGRAM		REC SET>
			PROGRAM	:
					P-1
	SELECT INDIVIDUAL			CAMERA RATE(FPS)
01:	0.5	02: 0.5		03: 0.5			04:	0.5
05:	0.5	06: 0.5		07: 0.5			08:	0.5
09:	0.5	10:	0.5	11:		0.5	12:	0.5
13:	0.5	14: 0.5		15: 0.5			16:	0.5
		NORMAL REC		:		67H

CRecording conditions

setting (P46)

Specifies settings such as allowing overwrite or stopping instead when the normal or alarm recording area of the internal hard disk is full.

DNormal recording settings

(P49)

Sets the image quality, audio, recording rate and programmed recording.

EProgrammed recording

settings (P50)

Sets the recording rate of the recording camera.

English

bRegarding network downloads

When downloading image data of the DVR via the network, an archive capacity area of approximately 2GB is necessary for best quality images. (40,000 images without audio)

H Alarm operation/	<ALARM OPERATION SET>
display settings (P60)
	ALARM RETRIGGER	: OFF
Sets the operation and display to
use at alarm detection.	MAIN MON. DISPLAY	: FULL
	ALARM PRIORITY	: LAST
	MON.2 DISPLAY	: NC

			<TIMER SET>					F Timer settings (P51)
WEEK		START	STOP PROGRAM		FPS		SET	Sets the recording according to day of
SUN		--:--	--:--	OFF	12.5	FPS	OFF
								the week and time.
MON		--:--	--:--	OFF	12.5	FPS	OFF
TUE		--:--	--:--	OFF	12.5	FPS	OFF
WED		--:--	--:--	OFF	12.5	FPS	OFF
THU		--:--	--:--	OFF	12.5	FPS	OFF
FRI		--:--	--:--	OFF	12.5	FPS	OFF
SAT		--:--	--:--	OFF	12.5	FPS	OFF
DLY		--:--	--:--	OFF	12.5	FPS	OFF
EXT		*****	*****	OFF	12.5	FPS	OFF
		<ALARM REC MODE SET>						G Alarm recording settings
	ALARM RECORDING			: OFF				(P55)
	PICTURE QUALITY			: ENHANCED
	AUDIO RECORDING			: OFF				Sets the alarm recording, pre-alarm
	ALARM INTERLEAVE			: ONLY				recording and motion sensors.
	REC RATE:		12.5FPS,		DURATION: 20SEC
	PRE-ALARM RECORDING			: ***
	REC RATE: **** FPS,				DURATION: ****
=>		(01731	ALARMS CAN BE RECORDED)
	ALARM TRIGGER			: ALARM
	MOTION SENSOR				->

39 How to set