Sanyo PLC-XL50A Part Names and Functions Top, qPOWER indicator, wWARNING TEMP. indicator

Part Names and Functions

Top

q w e r

t	o
y	!0

u

i

qPOWER indicator

–  Lights red when the projector is in stand-by mode.

–  Lights green during operations.

–  Blinks green in the Power management mode (pp.50, 66).

wWARNING TEMP. indicator

–  Lights red when the projector detects an abnormal condition.

–  Blinks red when the internal temperature of the projector exceeds the operating range (pp.55, 66).

eWARNING FILTER indicator

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (pp.54, 66).

rLAMP REPLACE indicator

Turn yellow when the life of the projection lamp draws to an end (pp.58, 66).

tON/STAND-BY button

Turn the projector on or off (pp.20-21).

yINPUT button

Select input source (pp.27, 37, 38).

uPOINT ( ed7 8 ) buttons

–  Select an item or adjust the value in the On- Screen Menu (p.22).

–  Pan the image in Digital zoom + mode (p.36). –  Adjust the volume level (Point 7 8 buttons)

(p.25).

–  Adjust the screen size (Point ed buttons) (p.24).

iSELECT button

–  Execute the selected item (p.22).

–  Expand or compress the image in Digital zoom mode (p.36).

oKEYSTONE button

Correct the keystone distortion (pp.24, 45).

!0 MENU button

Open or close the On-Screen Menu (p.22).

11