Basic Operation
AUTO PC button
Remote Control
Press the AUTO PC button to operate the Auto PC function. See page 24 for more details.
D.ZOOM buttons
Press the D.ZOOM buttons to zoom in and zoom out the images. See page 36 for more details.
CEILING button
Press the CEILING button to reverse the top/bottom and left/right of image (p49).
VOLUME +/- buttons (See page 25.)
AUTO PC button
D.ZOOM buttons
CEILING button
NO SHOW button
KEYSTONE button
(See page 24.)
POINT ed 
buttons
IMAGE button
P-TIMER
CEILING
LAMP CONTROL button
NO SHOW button
Press the NO SHOW button to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When the projected image is captured and is set as “User” in the Logo selection (p.47), the screen changes each time you press the NO SHOW button as follows.
black out ➜ the captured image ➜ normal ➜ • • • • •
KEYSTONE button
For details, see page 24.
IMAGE button
Press the IMAGE button to select an image level of the screen. See pages 32, 40 for more details.
P-TIMER button
Press the
To stop the
LAMP CONTROL button
Press the LAMP CONTROL button to select the lamp mode to change the brightness of the screen.
Normal … Normal brightness
Auto …… Brightness according with the input signal
Eco …… Lower brightness reduces the lamp power
consumption and extends the lamp life.
✔Note:
•See the previous page for the description of other buttons.
“No show” disappears after 4 seconds.
26
