NU4QG/NA3
SETTING THE BUZZER
A buzzer can be set to sound during alarm recording, if during recording the tape reaches the end, if buttons are pressed or if there is a mechanical failure that causes the tape to stop or be ejected, etc.
1Press the MENU button until the (SET UP 2) menu is displayed.
@@@@@@@<SET@UP@2>
*DISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
*BUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
KEY IN . . . . . . The buzzer will be heard when one of the VCR buttons is pressed.
WARNING . . . The buzzer will be heard if the heads are dirty and recording qualtiy deteriorate, or if the tape stops or is ejected due to a problem with the internal mechanism. To stop the buzzer, press the STOP button.
4Press the PAUSE/SEARCH button to save the setting.
2Press the ] button, until the desired item for which the buzzer function will be set is flashing.
3Press the l (or j) button to set “Y” for the functions described below.
ALARM IN . . . The buzzer will be heard during alarm recording.
TAPE END . . . The buzzer will be heard when the end of the tape is reached during recording. To stop the buzzer, press the STOP, EJECT, FF, REW or PLAY button.
NOTES:
•If “N” is set, the buzzer will not be heard.
•During timer recording mode, security lock engaged mode and alarm recording mode, the buzzer will not be heard when a button related to one of these modes is pressed, even if “Y” is set for the “KEY IN” item.
CLOCK ADJUSTMENT
When using 2 or more VCRs of this same model, the clock on the second VCR and on, can be synchronized with the clock on the first VCR, using the CLOCK ADJUSTMENT function.
•To use CLOCK ADJUSTMENT function, “INPUT OUTPUT” in the (SET UP 5) menu must be set to “CLOCK SET”.
1Connect the ALARM OUT/CLOCK OUT terminal on VCR 1 to the ALARM IN/CLOCK IN terminal on VCR 2.
2Repeat the procedure for all the other VCRs, connecting the ALARM OUT/CLOCK OUT terminal on VCR 2 to the ALARM IN/CLOCK IN terminal on VCR 3, and so on.
3Press the MENU button until the (SET UP 3) menu is displayed.
4Press the ] button, until the “EXT TIME ADJ.” setting is flashing.
5Press the l (or j) button to set the hour at which the adjustment will be conducted.
Example
@@@@@@@<SET@UP@3>
*ALARM@MODE@@@@@@@Y1
*ALARM@SPEED@@@@@@8H
*ALARM@DURATION@@@20S
*VERTICAL@SYNC@@@@Y
*EXT@TIME@ADJ.@@@@03:00
*TAPE@IN@MODE@@@@@STOP
*TAPE@END@MODE@@@@REW
6Press the PAUSE/SEARCH button to save the setting.
°The setting procedure on the first VCR is now completed.
7Repeat the procedure for all the other VCRs, setting “EXT TIME ADJ.” (to the same time as set on the first VCR).
NOTES:
•Connect the COM terminal on all VCRs used.
•This function will not operate on the day the daylight saving/standard time is changed.
NOTES:
•Be sure to set the same time on all the VCRs.
•The clock adjustment cannot be set to “00:00”.
36 | English |
