NU4QG/NA3 (SRT-2400DC GB) Mon. Sept., 17/2001

NORMAL RECORDING

Changes to the Recording Speed Mode During Recording

It is possible to permit or prevent changing the recording speed mode during recording.

1Press the MENU button until the (SET UP 4) menu is displayed.

@@@@@@@<SET@UP@4>

*SW@OUT

@@TIMING@@@@@@@@@@FIELD

@@FIELD@@@@@@@@@@@01

@@8H@@@@@@@@@@@@@@Y

*THREAD@CHECK@@@@@Y

*VIDEO@LOSS@@@@@@@N

*REC@SPEED@@@@@@@@N

*EJECT@SET

@@EJECT@MODE@@@@@@EJECT1

@@OPERATION@@@@@@@SLAVE

2Press the ] button, until the “REC SPEED” setting is flashing.

3Press the l (or j) button to set the desired mode.

N. . . . . . . . . . Recording speed mode can not be changed

Y. . . . . . . . . . Recording speed mode can be changed

4Press the PAUSE/SEARCH button to save the setting.

Action to Take when the Video Signal Deteriorates

If there is no video signal during recording, or when a menu is not displayed (in stop, fast forward, rewind modes), “VIDEO LOSS” can be displayed on-screen.

If in the (SET UP 5) menu “WARN.OUT” is set to “V.LOSS” or “T OR V”, a signal (0V) will be output at the WARNING OUT terminal.

If in the (SET UP 2) menu, in the BUZZER section WARNING is set to “Y”, the buzzer will be heard. To stop the buzzer, press the STOP button.

1Press the MENU button until the (SET UP 4) menu is displayed.

2Press the ] button, until the “VIDEO LOSS” setting is flashing.

3Press the l (or j) button to set the desired mode.

N. . . . . . . . . . The video loss warning is not active.

Y. . . . . . . . . . . The video loss warning is active.

4Press the PAUSE/SEARCH button to save the setting.

English

21

Page 22
Image 22
Sanyo SRT-2400DC Changes to the Recording Speed Mode During Recording, Action to Take when the Video Signal Deteriorates