Camera Settings (CAMERA)

4Use the joystick lever (xy) to select a zone to be weighted and use the lever (vw) to adjust weighting.

Selecting a zone to be weighted shows the corresponding zone on the screen.

•

TOP

•

BOTTOM

•

LEFT

•

RIGHT

• CENTER [FIX] (The value is fixed to “7”.)

Available settings: 0 - 7 (The larger the number, the higher the weighting.)

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

2Use the joystick lever (xy or vw) to move a mask pattern to the area to be excluded in metering, and press the [ENTER] button.

This sets the mask pattern for the area to be excluded in metering.

BLC MASKING

CONTINUE (y)

bMulti-spot metering (MASK)

Sets backlight compensation by masking the bright area of the background using mask patterns.

The multi-spot metering (MASK) function is available only when registering a view setting file in the CAMERA VIEW screen (P27).

Set [MASKING] to “ON” in the MOTION SETTING screen.

1Use the joystick lever (xy) to select [BLC], use the lever (vw) to select “MASK y”, and press the [ENTER] button.

The BLC MASKING screen appears. A mask pattern is displayed in the top left of the screen.

Mask pattern

BLC MASKING

CONTINUE (y)

If you want additional mask patterns to be set, repeat the above procedure.

<To delete the mask pattern>

Use the joystick lever (xy or vw) to place a mask pattern over the mask pattern to be cancelled, then press the [ENTER] button.

3Use the joystick lever (y) to move a mask pattern to the bottom area of the screen and continue holding the lever straight down for three seconds.

This completes the mask pattern setting procedure.

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

15