Camera Settings (CAMERA)
Setting the profile compensation
F (APERTURE)
Further emphasizes the profile of the target object. The amount of compensation can be adjusted for the horizontal or vertical directions.
SYNC | INT |
|
IRIS | AUTO | y |
WHITE BALANCE | ATW | y |
BLC | OFF |
|
SHUTTER | OFF |
|
APERTURE | ON | y |
AGC | ON | y |
GAMMA | 0.45 |
|
DAY/NIGHT | AUTO y | |
PRESET | OFF |
|
MENU | BACK |
|
1Use the joystick lever (xy) to select [APERTURE], use the lever (vw) to select “ON y”, and press the [ENTER] button.
The APERTURE SETTING screen appears.
APERTURE SETTING
H | 8 |
V | 8 |
PRESET | OFF |
MENU | BACK |
Available settings:
•OFF: The profile compensation is turned off.
•ON: The profile compensation is turned on.
2Use the joystick lever (vw) to adjust the value for “H” (horizontal).
Available settings: 1 - 15 (The higher the number, the further the profile is emphasized.)
3Use the joystick lever (xy) to move the cursor to “V” (vertical), and use the lever (vw) to adjust the value for “V”.
Available settings: 1 - 15 (The higher the number, the further the profile is emphasized.)
☞After completing adjustment, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
G Setting the AGC level (AGC)
Sets the AGC (Auto Gain Control) level in four grades.
SYNC | INT | y |
IRIS | AUTO | |
WHITE BALANCE | ATW | y |
BLC | OFF |
|
SHUTTER | OFF |
|
APERTURE | ON | y |
AGC | ON | y |
GAMMA | 0.45 |
|
DAY/NIGHT | AUTO y | |
If you do not use the AGC function, set [AGC] to “OFF”.
Setting AGC
1Use the joystick lever (xy) to select [AGC], use the lever (vw) to select “ON y”, and press the [ENTER] button.
The GAIN SETTING screen appears.
GAIN SETTING
MAX GAIN | NORMAL |
DNROFF
Memo: Auto Gain Control (AGC) is a function that automatically adjusts gain level in the amplifier section for the camera’s video signal according to the brightness of the target object and keeps the signal output level constant. When the target object is bright, the gain level is decreased; when it is dark, the level is increased.
2Use the joystick lever (xy) to select [MAX GAIN] and use the lever (vw) to adjust AGC level.
Available settings:
•NORMAL: Initial setting
•MIDDLE: For dark target object
•HIGH: For very dark target object
•LOW: For bright target object
Memo: • The “LOW” option cannot be selected when the Day/Night function is set to “AUTO”.
•The value for the “MAX GAIN” setting depends on the Day/Night function mode.
•When the gain level is increased, the sensitivity is improved in dark condition, but the noise level increases.
3Use the joystick lever (xy) to select [DNR] and use the lever (vw) to select a DNR (Digital Noise Reduction) option.
Available settings:
•ON: Applies DNR.
(Reduces noise during low luminance level.)
•OFF: Does not apply DNR.
Digital noise reduction operates when the gain level increases. In addition, blurring and ghosting of images can occur when moving images are monitored, so the resolution is also reduced slightly.
When the electronic zoom is operating in the color mode, the DNR (Digital Noise Reduction) does not function.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
17