Camera Settings (CAMERA)
Setting the AGC level manually
When the AGC function is set to “OFF”, the gain level for camera’s video signal can be specified manually.
1Use the joystick lever (xy) to select [AGC], use the lever (vw) to select “OFF”, and press the [ENTER] button.
The GAIN SETTING screen appears.
GAIN SETTING
0dB
PRESET | OFF |
MENU | BACK |
2Usevalue.the joystick lever (vw) to select the gain level
Available settings: 0 - 30dB (The higher the number, the more the gain level is increased.)
•When the Day/Night function is set to “AUTO”, the AGC function cannot be set to “OFF”.
•The “AGC” can be set to “OFF” only when [SENSE UP] in the IRIS SETTING screen is set to “OFF”.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
Setting the gamma correction level H (GAMMA)
Sets the gamma correction level to adjust the contrast or brightness level in four grades.
SYNC | INT |
|
IRIS | AUTO | y |
WHITE BALANCE | ATW | y |
BLC | OFF |
|
SHUTTER | OFF |
|
APERTURE | ON | y |
AGC | ON | y |
GAMMA | 0.45 |
|
DAY/NIGHT | AUTO y | |
PRESET | OFF |
|
MENU | BACK |
|
1Use the joystick lever (xy) to select [GAMMA] and use the lever (vw) to adjust the gamma correction level.
Available settings:
• | 0.45: | γ= 0.45 |
• | 1: | γ= 1 |
•MODE1: Increases the contrast of the dark parts.
•MODE2: Further increases the contrast of the dark parts.
When “MODE1” or “MODE2” is selected, the image can be too bright depending on the target object.
☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.
18