Sanyo VCC-MC500P, VCC-MC600P Making the amount of movement in the B screen constant (PROPORTIONAL), CDisplaying a still image while switching the surveillance location (FREEZE)

Pan and Tilt Settings (PAN/TILT)

Making the amount of movement in the B screen constant (PROPORTIONAL)

The proportional function allows you to make the amount of movement in the screen constant by changing pan/tilt operation speed during manual operation according to the zoom magnification power.

1Use the joystick lever (xy) to select [PROPORTIONAL] and use the lever (vw) to select “ON”.

PAN/TILT SETTING

PRESET POSITION	SET y
PROPORTIONAL	ON
FREEZE	OFF
SET NORTH	OFF
TILT LIMIT	OFF
PRESET	OFF
MENU	BACK

Available settings:

•OFF: Disables the proportional function.

•ON: Enables the proportional function.

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

CDisplaying a still image while switching the surveillance location (FREEZE)

While the surveillance location moves by the Sequence mode or manual preset (PRESET GO) operations, the freeze function displays the still image immediately before the camera starts moving. After movement of the surveillance location completes, the still image is switched to the video image of the new surveillance location.

1Use the joystick lever (xy) to select [FREEZE] and use the lever (vw) to select “ON”.

PAN/TILT SETTING

PRESET POSITION	SET y
PROPORTIONAL	ON
FREEZE	ON
SET NORTH	OFF
TILT LIMIT	OFF
PRESET	OFF
MENU	BACK

Available settings:

•OFF: Disables the freeze function.

•ON: Enables the freeze function.

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

Setting the starting point (0 degrees) D angle information (SET NORTH)

When you install the camera and the starting point (0 degrees) angle information for the camera needs to be specified, set the angle information using the following procedure. You can set any direction as the starting point (0 degrees) indicating north direction.

1Use the joystick lever to orient the camera in the direction you want to set as the starting point.

2Use the joystick lever (xy) to select [SET NORTH], use the lever (vw) to select “SET”, and press the [ENTER] button.

When “SET” in the [SET NORTH] menu item changes to “ON”, the starting point (0 degrees) setting completes.

PAN/TILT SETTING

PRESET POSITION	SET y
PROPORTIONAL	ON
FREEZE	OFF
SET NORTH	ON
TILT LIMIT	OFF
PRESET	OFF
MENU	BACK

Available settings:

•OFF: Does not set the starting point angle information.

•ON: Sets the starting point angle information.

•SET: Setting operation is in progress. Determine the camera’s orientation, then press the [ENTER] button. This completes the setting and “SET” changes to “ON”.

☞After completing setting, use the lever to move the cursor to [MENU] and select “BACK” or “END”.

•The camera rotates clockwise. North is regarded as 0 degrees. For example, 90 degrees represent east.

•To display the camera’s angle information, set [DIRECTION] in the DISPLAY screen under the INFORMATION screen to “ON”.

31